jpot1
Elite member
Found this plan on rcgroups, original designer Jurgen with revisions by Rusty-Gunn. Just loved the way it looked and all of the videos looked so cool.
Took the 32" plans and shrunk them down to 90% to make things fit a little better on DTFB. Build was relatively straight forward, just had to shrink the slots in a few spots as the plans were for depron originally. I also expanded the back by 1/2 inch in order to fit a smaller swappable power pod that I have. It is based on the FT pod but only 1.5 inches wide.
My daughter picked out the color scheme and the pilot.
Notched out the wing and kfm panel to recess the servos under the wing. They have to be quite far forward in order to maintain the cog.
Pic of the swappable pod installed.
Was able to maiden yesterday and what a beautiful flyer. Flew both slow and fast, very stable. Love this bird!
Took the 32" plans and shrunk them down to 90% to make things fit a little better on DTFB. Build was relatively straight forward, just had to shrink the slots in a few spots as the plans were for depron originally. I also expanded the back by 1/2 inch in order to fit a smaller swappable power pod that I have. It is based on the FT pod but only 1.5 inches wide.
My daughter picked out the color scheme and the pilot.
Notched out the wing and kfm panel to recess the servos under the wing. They have to be quite far forward in order to maintain the cog.
Pic of the swappable pod installed.
Was able to maiden yesterday and what a beautiful flyer. Flew both slow and fast, very stable. Love this bird!