hanggar_mungil
New member
Hello guys, i need your sugest about my kk board.
I set KK board to tricopter, i use turnigy 9x and set to airplane. When i powering KK board and ESC after board boot LCD display ARMED with long beep sound. What the mistake?
2nd question, how to powering Yaw servo on pin 4 KK board? Can use same UBEC i used for radio receiver?
Regards,
I set KK board to tricopter, i use turnigy 9x and set to airplane. When i powering KK board and ESC after board boot LCD display ARMED with long beep sound. What the mistake?
2nd question, how to powering Yaw servo on pin 4 KK board? Can use same UBEC i used for radio receiver?
Regards,
Last edited: