Help! Naze32 Flash/bricked problem..

[Christoffer Ohlsen]

Hello..

Im trying to flash a bricked afroflight Naze32..
Im stuck at no contact to the board what so ever?

I have all the right drivers. And using cleanflight.. bootloading oinw are tryed.

Im trying both STM32 flashing and flashing throug cleanflight?
Any sugestions?

 

[LitterBug]

Does it show up as DFU after you boot the board while shorting the boot pads?

 

[PsyBorg]

I know there is no support for that board in betaflight but I wonder if you could connect to betaflight to use the erase feature and clean out the stuff that is loaded on it.