• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

New Electric flat 4--20 HORSEPOWER!!!

Tim Hoyer

Watch This!!!!!
#1
This is the biggest one we've built. 4 Turnigy 6364 SK motors, 4 Turnigy Sentillion HV ESC's, and 8, that's right 8, Turnigy 6S 6000mah NanoTech Lipos. Were close to 20 HP with this one and it's going in a massive Ultimate Biplane with an 8' wing.
 

Attachments

Last edited:

CHELLIE

Junior Member
#5
This is the biggest one we've built. 4 Turnigy 6364 SK motors, 4 Turnigy Sentillion HV ESC's, and 8, that's right 8, Turnigy 6S 6000mah NanoTech Lipos. Were close to 20 HP with this one and it's going in a massive Ultimate Biplane with an 8' wing.
That is Soooo neet :D I like it :) How are all the motors tied to the main shaft ? Worm drive ? Keep up the great work, Chellie
 

Tim Hoyer

Watch This!!!!!
#8
That is Soooo neet :D I like it :) How are all the motors tied to the main shaft ? Worm drive ? Keep up the great work, Chellie
A common shaft runs the full lengthwith a bearing at each end attached to a gear. Carrier gears are attached to each motor instead of useing the prop shaft. When you bolt down the motor it aligns with the gears and meshes together!!
 

Attachments

JoeyG

Senior Member
#18
Thats epic, build more! would it scale well building a flat six for smaller motors? look forward to seeing your progress. Nice one!

J.
 

Daniel Kezar

Ultimate Cheap Skate
#20
This is the biggest one we've built. 4 Turnigy 6364 SK motors, 4 Turnigy Sentillion HV ESC's, and 8, that's right 8, Turnigy 6S 6000mah NanoTech Lipos. Were close to 20 HP with this one and it's going in a massive Ultimate Biplane with an 8' wing.
that is a BEAST!!!!:eek::applause::applause: