output pinout changes in betaflight

[irekkin]

I'm trying to set my tricopter up on the latest version of beta flight. it seems like the pinout order on the output side is different then it was in cleanflight/triflight. in triflight the pinout was S1 S2 M1 M2 M3 then 5V on the #6 pin set. this did not work in beta flight. now it seems to be M1 M2 M3 ( for the motors anyway) and I have no idea where the servo connects as I have tried pinsets 4 and 5 and the servo does not respond. does this make sense.

i'm running naze 32 rev 6, x4rsb receiver, latest version of betaflight.

 

[irekkin]

I'm not sure but I think this is the answer to my question. https://github.com/betaflight/betaflight/wiki/SERVO_TILT-for-3.1. just thought I'd post it in case someone else runs into the same thing. I am running triflight now but from my understanding the next version out will merge with betaflight so I was trying to get a step ahead. also read that the naze (F1) boards will not work well with beta flight 3.1 or later.