Pan/Tilt FPV trouble setting up and connecting


hey guys, please help, got a fatshark pan/tilt setup and having trouble connecting.
using a Futaba t14sg RX, Fatshark Dominator V3 goggles, fatshark trinity head tracker module,
immersionRC VTX and FuriousFPV VRX. Been looking for videos but found no tutorials with this setup, just other RX's.
hope someone can help...
thanks in advance
stay calm and fly on.


Wake up! Time to fly!
When I set up mine on my skyzones I had to turn on head tracking in the goggles first then assign output channels to use by the radio. usually any combination of channels 5,6,7,8 are available for out putting the control signals to the radio. Then you assign the chosen channels in your radio to match.