KKArioKA
Epoxi Flyer
I was bored with my Combat Wing so i decided to push the limits:
got myself the infamous 2826 2200Kv motor that works so good with the 6x4 prop on everyones bixler; bulletproof ESC Plush 40A and the devilish propeller 7x6 APC. (regular 2200 3s nanotechs)
(former setup: emax 2812 with 7x6 and 30A hk esc)
I knew for a fact that with a 7x4 APC i would pull around 350W on this setting with the 7x6 i think its around 400W (can you guys check this im having trouble using the DriveCalc)
Here is the result; Lightning fast wing !!!!! but unfortunately the spars werent carbon fiber, the guy who made it used fiberglass rods resulting in wing folding at WOT trying for a low altitude - high speed pass.
next one will have carbon fiber rods and ill probably going to lamite with fiberglass tissue and epoxi finish cure.
got myself the infamous 2826 2200Kv motor that works so good with the 6x4 prop on everyones bixler; bulletproof ESC Plush 40A and the devilish propeller 7x6 APC. (regular 2200 3s nanotechs)
(former setup: emax 2812 with 7x6 and 30A hk esc)
I knew for a fact that with a 7x4 APC i would pull around 350W on this setting with the 7x6 i think its around 400W (can you guys check this im having trouble using the DriveCalc)
Here is the result; Lightning fast wing !!!!! but unfortunately the spars werent carbon fiber, the guy who made it used fiberglass rods resulting in wing folding at WOT trying for a low altitude - high speed pass.
next one will have carbon fiber rods and ill probably going to lamite with fiberglass tissue and epoxi finish cure.
Last edited: