Turbojoe
Elite member
I bought a used DX6e a few years ago. I had to send it in to Horizon for the free Li-Po update. It had been working fine for two years and then all of a sudden it won't power up fully. Push and hold that stupid momentary contact power "switch" they used on this thing and it lights up and the screen displays and then all goes dark no matter how long I hold the switch or how many times I try. I even opened it up and pulled the upper PCB and manipulated the "switch" by hand and still had the same problem. One of the boards has to have failed. I still have my DX6 Gen2 along with several other TX's but the DX6e was mainly my bench testing and back up TX and aside from that stupid momentary "switch" I was happy with it.
I know I'm going to have to send it to Horizon again but I wonder if anyone has had the same problem with a DX6e and what it cost for repairs.
Joe
I know I'm going to have to send it to Horizon again but I wonder if anyone has had the same problem with a DX6e and what it cost for repairs.
Joe