Sport Trainer Swappable 30

[TEAJR66]

Here is a Sport Trainer Swappable with a 30" wing span. This fly's nicely on a 24g 1300kv Hextronic Motor, 10 amp ESC, 8x6 Prop, 1000-1300mah Battery, 4 Channel Receiver and 4 9g Servo's.

While it is swappable, the pod is a tight fit in and out.



I apologize for the video quality. After three takes, this is what we went with.

The plans are attached in case you want to build one. If you have any questions, let me know. If you build one, let us know.

 

[Ron B]

your video is set to private settings so no one can watch it

 

[TEAJR66]

I think that fixed it. Let me know if it did not.

 

[BridgeInspector]

Do you have a dihedral recommendation?

 

[TEAJR66]

The plane showed here has one wing tip raised 3 1/2" with the other panel flat on he build surface.

2-3 inches will work fine for trainer style flight. Flatter for sportier flight. It is still pretty sporty with the 3 1/2" dihedral, but there is a good bit of self righting to it.

70 on the rates and 30 on the expo smooth it out nicely.

Controls are all 3rd hole from center on 9g servo arm and top hole on control horn. I used standard FT Control Horns on this build.