- Type
- 3D Print Files (STL, G-code, etc.)
Baby Baron Wall Mount
Designed By: Dan Sponholz
Designed By: Dan Sponholz
Designed to fit the Baby Baron, and Baby Brit (also works for similar sized aircraft). Designed to attach to a wall using #8 coarse thread drywall screws.
Other sizes available upon request.
Print Settings:
Material: | PLA+ (eSun) |
Layer Height: | 0.20mm |
Supports: | None |
Rafts: | None |
Infill: | 40% Grid |
Perimeters: | 4 |
Top Layers: | 5 |
Bottom Layers: | 4 |
* If you like this resource, please rate it. Thanks - SP0NZ
