- Type
- 3D Print Files (STL, G-code, etc.)
Caddx Ant AIO FPV Camera Mount
Design By: David Jester
3D printable adjustable camera mount for the Caddx Ant AIO FPV Camera. This camera mount requires:Design By: David Jester
[2] 3mm x 8mm screws and [1] 1" x 3/32" O-ring to complete the assembly.
Caddx Ant Mount Part 1.stl | Camera Plate |
Caddx Ant Mount Part 2.stl | Base Plate |
Suggested Print Settings:
Filament: | PLA, PLA+ (Tough PLA) |
Layer Height: | 0.20mm |
Supports: | None |
Rafts: | None |
Infill: | 25% |
Perimeters: | 3 |
Top Layers: | 4 |
Bottom Layers: | 4 |
*Always adjust your print settings to meet your printer and filament requirements.
