bloody baron

  1. SP0NZ

    Part Bloody Baron Wall Mount 1.0

    Bloody Baron Wall Mount Designed By: Dan Sponholz Designed to fit the FT Bloody Baron, Bloody Brit, and SideWinder (also works for similar sized aircraft). Designed to attach to a wall using #8 coarse thread drywall screws. Other sizes available upon request. Print Settings: Material...
  2. Figure9

    Solved Newbie with Tape

    I bought a Champ RTF & managed to fly & land it. Now I’ve stepped up to a Bloody Baron. Flew & crashed it numerous times. It had silver paint & stickers to begin with, now it’s dead. I’m building another Bloody Mess with my own DTFB design for wings & tail feathers. I don’t want to paint again...
  3. JGplanes

    Ready for combat and loaded for bear

    After watching the FT Battleship episode with the warbirds dropping bombs, I decided there wasn't enough good (somewhat realistic) bomb drops. I began designing these, and I'm pretty close to the final product. It prints in three pieces, snaps together, and uses one 9g servo. It also has built...
  4. 4A6B4EBF-41D1-45A8-AC3B-3AE153DDBBE4.jpeg


    FT Bloody Baron build
  5. F

    Bloody Baron - Your Setup? And Rudder - Yay or Nay?

    I've got a Bloody Baron on the way to the build table. Please share your build experience, setup, and whether or not you added the optional rudder servo. Why or why not? Be specific, give examples! (I'm kidding of course, but I would like to know IF you installed the rudder servo, or left it...
  6. M

    Bloody Baron rolling...

    I recently built a bloody baron, and it rolls almost un controllably after launch. I think it is a thrust angle issue but was looking for advice....
  7. K

    Would an FT Bloody Baron fly with the A pack?

    Hey, I'm fairly new to the hobby, only built 3 planes before and I wanted to try the Bloody Baron but I dont want to have to buy more electronics right now. Does anyone know if the Bloody Baron will fly at all with an A pack? I know its able to do quite a bit of acrobatics with the B and C pack...
  8. JGplanes

    Bloody Barons before and after FFE17

    My son and I both agreed that we had the most fun at FFE17 doing combat. There's just so much peer pressure to combat anything made of foam board! So our beloved Bloody Barons met their fate. They were our second ever FT scratch build. The Bloody Wonder being the first. We enjoyed flying them...
  9. D

    Hello everyone. new guy here

    Hi, This is my first post on these forums. But I have been following Flite Test for a year or so. After seeing all of the nice builds I decided to try it myself. I built the Bloody Baron first, and just completed the Tiny Trainer except for the electronics which are ordered. Does anyone know how...
  10. S

    That plane you have, but never fly

    Well, over 8 months ago I scratch built the FT Bloody Baron. The reason I built this plane was to have a 4 channel that I could learn to use ailerons with. However, due to the size of the park I was flying in I had stepped towards minis and ended up flying a mini scout most of the time. I...
  11. T

    Bloody Baron

    What Power pack (B or C) do you guys recommend for the Bloody Baron? I'm still learning how to fly, but my friends and I want to start Dog fighting. I'm all ears! (:
  12. R

    Bloody Wonder vs Blood Baron

    I would loves to see a dog fight episode where you have at least 2 of each in a streamer cut then fight to the death.