foamboard build

  1. N

    Help! Single EDF plane?

    Hiya guys. I recently got a 3d printer (Bambu A1 mini which is the very best printer you can buy) and put it to good use by printing an adapter to convert my brushless motor to an edf. Does anyone have plans for a Single edf foamboard plane? Anything would be greatly appreciated. I believe it's...
  2. B

    First the Lidl Vulcan maiden, now the maiden of the all foamboard version - it was FAST!

    Hopefully you've seen my Lidl + foamboard Vulcan maiden, now here's the maiden of the all foamboard Vulcan that inspired my Lidl version. It flew really well, very fast, not slow and easy like my Lidl based one. Plans and the build blog article for this are linked below. 2 sheets of...
  3. DAWNSIGHT4

    Mini Boeing 747 made from a tiny whoop!

    So recently I have been really into mini projects with tiny whoops. I recently built a mini RC paper airplane using a mini cheerson drone, and since then multiple aircraft using only two motors using differential with a fixed elevator. Examples of this would be flite tests video of making a mini...
  4. DAWNSIGHT4

    1st Master series build FT Corsair!!!!

    A friend of mine that I fly with said I should start posting build threads of some of the builds I have done recently. So I decided why not? I am a scratch builder through and through. I have only bought one or two planes total. For the corsair, I decided I want to make this thing as light as...
  5. arovillard

    TTP-1: Single sheet Combat wing

    Maiden flight: I've spent some time designing a wing that was really cheap to build, very strong, very stable and capable of flying slow, perfect for wing combat!. The motivation came from having a lot of friend transitioning from flying quads to wings, so they can do it pretty well, but they...
  6. tollesding

    Project air EDF glider remake

    Hello everyone, Today I want to tell you on how I built the experimental EDF Jet from Project Air. I got really carried away by this airplane. I wanted to built something with an Edf so I decided to do it. At the beginning I printed out the plans for wing, elevator (modified a bit) and rudder...
  7. D

    f22 raptor,where did i go wrong!!!

    Hi and first off im a complete newbie to fix wing. I have done a scratch build f22 raptor made from foamboard with 24"wing. Built with turnigy park 300 1600kv motor,orange rx,2x htx 9g servos,hobbyking 10a esc and a 3s 500mah lipo. Problem is it didnt even get off the ground,straight up and...