osd

  1. M

    OSD/GPS with home arrow WITHOUT a flight computer?

    Hey all, I just want to fly around manually with a pretty long range. That means I'll need some indicator for which way "home" is. I don't really want to go through all the hassle of learning/wiring/configuring a flight computer, is there a way to accomplish OSD/GPS for FPV without a FC?
  2. S

    Looking for EACHINE VTX03 Super Mini FPV Transmitter and osd compatible micro fpv cam

    I am upgrading my ft gremlin and I have the f3 mini magnum wich supports osd. I just need a more powerfull transmitter and a micro osd compatable camera like the one in the link. If anyone has any extras lying around that would be awesome!! Thanks...
  3. Q

    quick question about he MinimOSD

    I have a MinimOSD all wired up correctly and working properly, I think, but there is one issue with it. All of the telemetry I need for the most part works (like arming and disarming) except for the battery voltage? It is constantly displaying 17ishv when my quad is only connected to a 3s? I...
  4. Q

    Minim OSD not displaying data?

    I thought I had my osd setup correctly but it is not displaying the actual osd at all. I do not have a gps connected as I mainly just want battery information so i set mine up slightly differently. I have a 5v and ground from the cc3d connected to the appropriate pins on the left side of the osd...
  5. C

    Foxeer Monster V2 OSD voltage not working

    I have a Foxeer Monster V2 and it works great, but now I would like to set up the voltage meter to display on the OSD. It came with an input labeled "VSEN" and the wire attached was just a bare wire at the end. I read somewhere that if I was using the 12v pad to power my camera (which I am) I...
  6. J

    Help - RSSI on OSD

    Title pretty much explains it, I'm looking for a simple way to get the RSSI signal from FrSky receivers onto my video signal. I've done it on one of my miniquads using the Betaflight F3 board and its built in OSD, but I'm looking for something to use on flying wings and quads with cheap fc's...
  7. C

    HELP NEEDED!!!

    Deluxe F3 Flight Controller With Built-In OSD Turnigy TGY-IA6B V2 Receiver 6CH 2.4G AFHDS 2A Telemetry Receiver W/SBUS I got this from a friend for free because he didn't use them and this is my first build and I was wondering if anyone knew a video or could make one showing me how to get osd...
  8. C

    HELP NEEDED!!!

    Deluxe F3 Flight Controller With Built-In OSD Turnigy TGY-IA6B V2 Receiver 6CH 2.4G AFHDS 2A Telemetry Receiver W/SBUS I got this from a friend for free because he didn't use them and this is my first build and I was wondering if anyone knew a video or could make one showing me how to get osd...
  9. M

    MinumOSD Micro

    I have a quadcopter with a Naze32 in it, and I recently bought a MinumOSD Micro. I'm usually pretty good at looking things up to fudge my way through things, but this osd stuff is super confusing. I want the osd to display rssi, voltage, current, and mAh used. I have no idea what I need to do to...
  10. P

    Naze32 Video 'How to' Series now on YouTube

    Hey, Just a quick note to let you know that my latest flight controller series about the Naze32 is now available on the Painless360 YouTube channel - https://www.youtube.com/playlist?list=PLYsWjANuAm4p47OBBTOo4Xr3lNUc8PFpc In the video series we have videos that cover initial setup, advanced...
  11. L

    Some OSD reviews?

    I'm new to the hobby and i am interested in buying an osd, so far i'm between the eagletree osd pro and the 3DR APM MinimOSD Rev1.1 Thankyou guys you youtube channel has inspired me!
  12. jamieFL

    OSD Help

    I need help choosing an OSD module. I have been shopping on eBay and found many MinumOSD choices. I suspect that they are not all the same. I don't even know if the Minum is my best choice. I am also looking to save on weight if possible and I'm building on a budget. I am building a V-Tail...
  13. F

    Solve MinimOSD hanging and Flickering

    Hi all! I recently build a OSD on my Tricopter and at first gave problems with flickering and hanging of the MinimOSD board (blanking/hanging) I made short clip on youtube how to fix this. http://youtu.be/tUAWNxh1KQs Here is the solution I made (there are different ways to fix this btw ;-) )
  14. kah00na

    Camera, OSD, and VTX Wiring Layout

    Will this wiring layout in the picture work? I want the OSD to show the current voltage of my main 3S or 4S battery and I want it to show the voltage behind my UBEC. I have a HobbyKing E-OSD that can show two voltages on the screen. It says it only does 2S and 3S but mine works with 4S...
  15. Andre

    Mini OSD System w/GPS & Teleporter 3

    Finally was able to wire it up last night. Seems to work well. Just used some servo extensions and a balance wire to read battery #2 voltage. Not the smallest unit on the market but the price was right. I used some 45cm servo extension cables. Interesting as the system will not function...
  16. A

    RX with RSSI support and compatible with Turnigy 9X

    Hi Guys, Just bought a EPP FPV from HK, previously been flying multi rotor FPV, but fancied a plane. I have bought a SUPPO OSD (formerly known as Pigeon OSD), I'd really like to get RSSI on my OSD, but my TGY 9X RX needs a whole bunch of messing with to get at the RSSI info. Can anyone...
  17. V

    Cyclops OSD - RTH and Altitude Hold

    Hi All, I'm running version 1.1 of the OSD and plane isn't gaining altitude when switching to RTH. I have settings RTH ALT at 200 ft and RTH ALT HOLD set to N. With these settings, if plane is below 200 ft and RTH is enabled, the plane should immediately gain altitude, correct? From manual...