sukhoi

  1. Matagami Designs

    Plane Sukhoi SU - 47 Berkut V1.0

    A low poly fold up SU-47 based on @Namactual 's datRhino Tested As an F pack motor, RS2205 2300kv, 20amp esc, HQProp's Ethix S5 5 x 4 x 3 prop. 1300mah battery. Full flying canard powered by 9 gram servo, and (x4) 5 gram servos for ailerons/elevators. TVC yaw control powered by an additional...
  2. Flitedesign 3d

    SU-27 Build Guidance and Pictures

    This is the build assistance thread for the SU-27. If you want to give this jet a try this is the place you can share your journey and ask for help. Plans for the SU-27 here: https://forum.flitetest.com/index.php?resources/sukhoi-su-27.239/ Development thread...
  3. Flitedesign 3d

    Plane Sukhoi SU-27 1.0

    This is the first version of the plans for my twin edf Sukhoi SU-27. This jet is a high performance jet powered by two 12-blade 70 mm ducted fans and it has a thrust/weight ratio of 1.2 if built right. It is decently fast, very maneuverable and good looking aircraft. It is a rather challenging...
  4. 20190920_172907.jpg

    20190920_172907.jpg

    This Sukhoi is an awesome 3d plane
  5. Electric Mike

    Horizontal stabilizer falls of in 3d flight - Parkzone Sukhoi 29mm

    Hey Everyone, here is my story and question: I have about 30 flights on my Parkzone Su29mm, and I am now rather consistent at smooth flights. It is actually rather simple to land, and I am just starting to explore some advanced 3D maneuvers. Very fun plane and looks great. Unfortunately last...
  6. M

    Micro Su-35/37 with thrust vectoring nozzles - a challenge for Flite Test

    Hi Flite Test!!! I thought I will give you a hard project. You have already made F-22 from America, JA-37 from Europe, maybe it's time for something Russian? :) Your goal is to make an EDF Su-35/Su-37 (or a mix of them, like Su-35 with canards :D) from foam/depron with advanced 3D fuselage and...
  7. M

    Micro nozzles thrust vectoring EDF Su-35 - a challange for Flite Test

    Hi Flite Test!!! I thought I will give you a hard project. You have already made F-22 from America, JA-37 from Europe, maybe it's time for something Russian? :) Your goal is to make an EDF Su-35/Su-37 (or a mix of them, like Su-35 with canards :D) from foam/depron with advanced 3D fuselage and...
  8. S

    New Sukhoi-29MM

    I just got the new Sukhoi-29mm from HorizonHobby and am going to be flying it this weekend. Any lessons learned or tips about this plane? I am looking forward to trying out the new modes as I am still a pretty new pilot. Anyone else have this plane?