• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

support

  1. HobCoil

    Connecting a flysky reciever with furibee x215 pro

    Hello, my name is Griffin and I am relatively new to the fpv scene. recently I purchased a Furibee x215 pro and need to replace the current RX(a frsky xm+) with a flysky compatible one, I just have a few questions. -Is this new RX compatible with the FC...
  2. HobCoil

    Quad in acro mode tries to correct itself

    Hi, first time poster here, but I have used a lot of forum post to build my first quad, it is up and running. After flying it in acro mode for a couple days, I started to attempt different tricks, but found the quad would fight me. I brought the quad to the workbench and found that when my...
  3. W

    receiver mode in beta flight won't work

    OK to start off with, im a new drone builder and got a x:bolt 250 for Christmas and decided to put it together. I was very meticulous in the soldering and putting it together to make sure everything was done correctly, so finally, i was able to begin programing the flight controller! i plugged...
  4. A

    Gremlin Emax motor faulty, need replacement!

    Hey Flitetest, I already submitted a Support inquiry about this but I haven't heard anything in 24 hours now and these things always bother me to no end so I feel impulsive to try and get a response lol. (But sorry if I'm being pushy) My Case number is 43646 Basically, one of my motors on my...
  5. A

    Gremlin HYPE/website support?

    Hey everyone, I'm new so I figured I'll just post here. Anyone excited for the gremlin power pack I can't wait to get my hands on one :D they keep teasing it I just want to buy one already. I own an inductrix fpv and unfortunately have been pretty dissappointed with the battery life which Im...
  6. Loudmouthman

    HELP : 57seconds of strange Motor behaviour

    I figured it would be easier to demonstrate the issue I am having with a recent build. The motors are behaving erratically though now I come to type this I wonder if I should swap around the connectors at the board to see if its the ESC/Motors or the FlightController. Im going to go away and try...
  7. C

    Using the FTSTEM Hangar.

    Hi All, I'd like to start a discussion on using the FTSTEM Hangar. I am using the curriculum to teach a STEM class here in Hawaii that is outside of normal public school. Right now we are offering it to high school students either in public, private or homeschool as an after school option. I...
  8. J

    Problem with receiver

    I recently purchased a versacopter kit, and a spectrum 5e with the AR 610 receiver (or 600 I forgot). I followed the build video exactly, my soder joints are solid and everything is powered when the battery is plugged in. I bound my transmitter and receiver before plugging everything in. But the...
  9. E

    Multirotor Student Group needs your help

    Hello everyone. I am a new member here and enthusiast of the multirotor and FPV communities. A student at the University of Michigan and soon to be founder(Fall 2015 group registration pending) of the University of Michigan Multirotor Group. As this hobby is fairly expensive for newcomers, I...
  10. H

    Hobby Wireless is proud to be apart of the Flite Test forum!

    Hello Everyone! Welcome to the Hobby Wireless forum! Feel free to post your comments, questions and concerns about any of our products and/or anything FPV! We want to know about your projects, your builds, and anything you are doing with FPV! Everyone is welcome to share good and friendly...
  11. N

    Mini Switch landing gear

    So recently I got a Flyzone Mini Switch as an intermediate plane. Nothing too special, im using a 2200 3C. When I was taking off with the landing gear, I hit a bump and the landing gear separated from the plane. Any ideas on how I can reattach it more firmly? It would be a little difficult to...
  12. StoneKap

    Show off your FLITE TEST support!

    Post pictures of you and your Flite Test t-shirt, sticker, drawing, tatoo, Photo-shopped photo, etc... Talented hands Brian Fred Carr. Thank you UndCon! Thanks Gorazd Pisanec!