vtail

When I bought the UMX Radian several years ago my intention was merely wanting to spend a relatively small amount of $ that was about to burn a hole in my pocket in the not-so-local hobby shop. On the ride home I was frustrated to find it didn't even have ailerons. "What had I done?"...

Scratch build Vtail quad enlarged Hunter 500 frame from 433mm to 560mm from front motor to front motor Hello there my name is Mark I have been in the RC hobby for many years flew mostly Fixed wing Have tried 250,450 and 600 sized Helis crashed them all in no time at all Recently I have been...

I'm unsure if this will be a V-tail or a quad. I'm more interested in the authority that a Vtail has, with the advantage of the Tri without some of the negatives. (Such as: a motor goes out and the Tri crashes. Same is true for quad or V, but less likely to destroy all things.) I'm also...

So, bought the V-Tail motor mounts, had a hell of a time getting them onto booms that I painted, which resulted in one of the bottom sides that goes on the bottom of the boom breaking. Glued it back on, used a zip tie to secure the whole thing to the boom. Did some test flying which resulted in...

Specs: KK 2.1.5 board Multistar Aerodrive SK3 - 2822-1275 Multistar 15amp ESC 1800amp 3s battery 8x4.5 sf props So ive rebuilt this twice after accidentally setting up my battery connector with the polarity reversed the first time (DOH!). It does fire up correctly now, but i can not get it...

I am building a V-Tail and have almost everything decided/purchased except the motors/props/esc. The weight minus the Naze32 flight controller and OSD module is 430 grams and the average weight of my 2200mah 4S batteries is 250 grams. The booms are currently 11.5 inches long and will be...

Hi everyone. Thank you Josh, Josh, and Dave. I am building my second multirotor. The first was a Fortis Airframes Titan tricopter (that I found from an ad on your site) with an APM 2.6 flight controller. It flies very well and is used for aerial photography. I want to build something for...

Hi Guys! Finishing up my first quad build, its a v tail. My vtail has the rear motors facing downwards. My question is how do I install my props on these motor in order to push air towards the ground. I know they have to go label up. Should i use CW props on a CCW motor rotation and vice /...

I am building the perfect VTAIL airframe for aerial video, photography, and FPV. My aim is to eliminate the anxiety, cost, and downtime related to having to rebuild or order more parts after every hard or less than perfect landing. Therefore, it must be nearly indestructible. It must...

After watching some videos from http://www.youtube.com/user/NightFlyyer with his experiments on single bladed props, I can't stop thinking about how it would work with a multi rotor. This would be a great mod to a Bat Bone V Tail (just throwing that out there). Other than the modded props, I...

This is a V Tail PROTOTYPE (more to come), that would made because of the V Tail Bat-bone and my green envy, with a bit of walking aimlessly through Home Depot this V Tail PROTOTYPE was made. I was really surprised that it flew so well on the first try. Production will be better on the next one...