• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

9XR OPEN TX problem.


Junior Member
hello guys. i have a problem i am hoping someone can help me out. I have a turnigy 9XR that i loaded OPEN tx on it. im using a Frsky tx and a D4R-ii on CPPM mode in a mini quad.. the flight controler is a Flip32. ok.. so here is the problem.. when i am seting up the receiver in the Baseflight software the Roll, pitch, yaw, throttle are idle at 2023 and when i move the sticks it will go down to 1196 but that it.. im not sure why it is doing this im new to the Open tx and don't know much of how to program it. any input would be a great help. thank you.

add note. the the aux's work fine the move form 996 to 2023