Anyone using their cnc to cut quad frames

[t81rd]

I've just recently gotten into quads and was curious to see if anyone has cut any frames using their CNC. Can't imagine carbon fiber would be hard to cut outside of the design

 

[PsyBorg]

I dont do any home cnc stuff but I do work with carbon frames.

Be very careful when cutting or working with carbon fiber dust.. Its nasty nasty stuff. Possibly enclose your cnc and have some sort of vacuum filtration or do the cutting under liquid. The dust is deadly.

 

[Merv]

I agree with @PsyBorg, I would not recommend cutting carbon fiber with anything that creates airborne dust.

 

[t81rd]

I do use an enclosure with dust extraction, but not sure what else I would use to cut them.