Hi Guys, have a quick question. Recently i installed 4 Castle Creations 35amp esc on my quad. The problem i'm having is getting 3 of them to power on. 3 are non bec and 1 is. The one that has a bec powers on fine and spins the motor no problem, i also use this one in the number 1 position on my kk2.1 to power the board. The other 3 do nothing, no lights, no tones, nothing. I tested all ports on my power distribution board and they all show voltage. I don't think all three could be bad, that'd be crazy, its probably procedural but i'm at a dead end. I can get those 3 to power on and program via usb interface so i know their boards are working (i did flash and program all 4 with the identical parameters).
Thanks for your help............again....
Mike
Thanks for your help............again....
Mike