eMax Gt2215 1150kv motor violently vibrates

[MisterRaynbow]

As the title says the motor started vibrating a lot after a crash. Here is a video:

Any help will be appreciated

 

[Hai-Lee]

It could be a bent motor shaft, magnet carrier bent or a damaged spinner/prop adapter, (if fitted).

Another cause but not normally for small motors is a collapsed bearing, (Normally makes a lot of noise as well).

Some motors and parts available and some not though mostly parts are limited to new motor shafts only.

 

[Bricks]

Is this the same prop that was on it after the crash? That sound could be a prop that was flexed and is out of alignment or as stated earlier a bent motor shaft..

 

[Bromego]

take the prop off, if the motor still vibrates its the motor (bent shaft, thrown magnet)

if its fine, then the vibration is coming from the prop, (bent, unbalanced)

 

[MisterRaynbow]

take the prop off, if the motor still vibrates its the motor (bent shaft, thrown magnet)

if its fine, then the vibration is coming from the prop, (bent, unbalanced)

Yeah the motor does not vibrate without a prop, I ordered another pair of props that will come today

 

[Bromego]

Yeah the motor does not vibrate without a prop, I ordered another pair of props that will come today

Good luck mate

 

[MisterRaynbow]

Good luck mate

Ugggh. It still vibrates the same! Might have to get a new motor