I want to know what non-FT motors do you use when you need to sub in for a power pack motor?
This is what Flite test has offer for the base Swappable systsems.
A-pack $?
Emax1806x2300kv 3S, 5x3 $16 FT radial 1806 2280kv, 4s 5x3 $17
F-pack $?
Emax 2205x2300kv 3s 6x3 $12 FT Radial2205x2300kv, 4s 5x4.5x3 $20
B-pack $?
emax CF2822x1100kv 3s, - 8x6" $11 FT Radial 2212B 1050KV, 4S, 8x6 $25
C-pack $?
emax GT2215 1100kv 3S, 10x4.5 $19 FT Radial 2218B 1180kv 10x4.5SF $30
I do not want to undercut FT. While the motors aren't the cheapest, the added cost tends to be spent on reliability, performance and quailty. Not everyone can afford or get them at a reasonable price. So what is a Good Alternate?
*The snapshots here are taken from the store today for reference where possibe.
This is what Flite test has offer for the base Swappable systsems.
A-pack $?
![1659463970310.png 1659463970310.png](https://ftforumx2.s3.amazonaws.com/2022/08/424137_3077af2de65076bcb665d404d52caddd.png)
![1659464270990.png 1659464270990.png](https://ftforumx2.s3.amazonaws.com/2022/08/424143_72df95a02e8f84064687cff96f13dbc6.png)
Emax1806x2300kv 3S, 5x3 $16 FT radial 1806 2280kv, 4s 5x3 $17
F-pack $?
![1659464729413.png 1659464729413.png](https://ftforumx2.s3.amazonaws.com/2022/08/424151_cf23d16e050e2eb3015a18fc811223d8.png)
![1659464387470.png 1659464387470.png](https://ftforumx2.s3.amazonaws.com/2022/08/424145_17011722c5ab8348b91235cdec900244.png)
Emax 2205x2300kv 3s 6x3 $12 FT Radial2205x2300kv, 4s 5x4.5x3 $20
B-pack $?
![1659463911490.png 1659463911490.png](https://ftforumx2.s3.amazonaws.com/2022/08/424135_e857312e9ef3b55e71192594f15244d8.png)
![1659464605037.png 1659464605037.png](https://ftforumx2.s3.amazonaws.com/2022/08/424149_5eeb3b415f6ff30cd265800240c7813a.png)
emax CF2822x1100kv 3s, - 8x6" $11 FT Radial 2212B 1050KV, 4S, 8x6 $25
C-pack $?
![1659464094448.png 1659464094448.png](https://ftforumx2.s3.amazonaws.com/2022/08/424139_602ac7aa2f31470d4f25e324d527b7d4.png)
![1659464463406.png 1659464463406.png](https://ftforumx2.s3.amazonaws.com/2022/08/424147_7fd7e78cd6b09fdd2fb4278c0bccdcf9.png)
emax GT2215 1100kv 3S, 10x4.5 $19 FT Radial 2218B 1180kv 10x4.5SF $30
I do not want to undercut FT. While the motors aren't the cheapest, the added cost tends to be spent on reliability, performance and quailty. Not everyone can afford or get them at a reasonable price. So what is a Good Alternate?
*The snapshots here are taken from the store today for reference where possibe.
Attachments
Last edited: