JustPlaneChris
Well-known member
Hi fellow scratch builders! If any of y'all are using Fusion 360, you may want to give this a read:
https://knowledge.autodesk.com/supp...articles/Fusion-360-Free-License-Changes.html
If you just use Fusion 360 for creating STL files for 3D printing or other simple things it probably won't affect you. If you are using it to export STEP files as I am for unwrapping in Solidworks, then as of Oct 1 you're hosed. I know could use the export STL>Meshmixer>Inkscape method to end up with flat patterns, but Meshmixer is not my favorite tool.
I had been putting off really learning Solidworks, but now it looks like I'm going to need to re-create and finish my A-7 Corsair project in Solidworks, because I won't get it finished by the Oct 1 cutoff date for exporting.
https://knowledge.autodesk.com/supp...articles/Fusion-360-Free-License-Changes.html
If you just use Fusion 360 for creating STL files for 3D printing or other simple things it probably won't affect you. If you are using it to export STEP files as I am for unwrapping in Solidworks, then as of Oct 1 you're hosed. I know could use the export STL>Meshmixer>Inkscape method to end up with flat patterns, but Meshmixer is not my favorite tool.
I had been putting off really learning Solidworks, but now it looks like I'm going to need to re-create and finish my A-7 Corsair project in Solidworks, because I won't get it finished by the Oct 1 cutoff date for exporting.