sumone
Active member
i Recently had to repair a Volantex Phoenix V1 and also upgraded the servos to metal gear ones.
Before the Crash / Upgrade it would glide beautifully with the fuse pretty much horizontal with very little sink.
Since the Repair/Servo Upgrade it glides with the nose slightly raised causing it to loose air speed with noticeably more sink
I have tried adjusting the ailerons and trimming it out but can't seem to get it like it was.
I have attached a pic exaggerating whats happening if that helps.
Any Ideas ?
Before the Crash / Upgrade it would glide beautifully with the fuse pretty much horizontal with very little sink.
Since the Repair/Servo Upgrade it glides with the nose slightly raised causing it to loose air speed with noticeably more sink
I have tried adjusting the ailerons and trimming it out but can't seem to get it like it was.
I have attached a pic exaggerating whats happening if that helps.
Any Ideas ?