spudwrench
Member
Ok guys so ive been practicing with my zmr 250 at least a couple of days a week for a few months now. After several broken props, and fpv antennas. I decided to take a step back and get me a blade inductrix bnf. I really have no trouble at all flying this little quad in safe mode. Turn that off however and its way too touchy and my reaction time just isn't good enough for angle mode.
Some difference ive noticed between to the 2 quads is the little inductrix is way more stable in horizon mode than my zmr 250. I am not sure if this is just because of how much more power my zmr250 has or if I need to adjust some settings.
I can hover my zmr 250. I can turn it full 360 degrees using left stick. The issue isn't until I try to maintain forward flight. It hovers roughly at about 30%- 40% throttle.
when I apply slow forward momentum it isn't much of an issue. When I apply normal forward flight I have to compensate by adding throttle or it wont maintain altitude in forward motion. Then as I enter a turn and it slows down coming out of the turn if I don't drop the throttle precisely. It wants to gain altitude. So most of my flights end up looking like someone who is bobbing up and down in the air and doesn't have much control or confidence in where the quad will end up.
Some info about my quad sunnysky 2204 2300kv, bl heli 20a esc,5x3 props, naze 32 acro board running latest beta flight2.8.1, 200mw tx, runcam fpv
Ive took screenshots of some settings that you guys might want to know not sure what to look for or adjust.
Some difference ive noticed between to the 2 quads is the little inductrix is way more stable in horizon mode than my zmr 250. I am not sure if this is just because of how much more power my zmr250 has or if I need to adjust some settings.
I can hover my zmr 250. I can turn it full 360 degrees using left stick. The issue isn't until I try to maintain forward flight. It hovers roughly at about 30%- 40% throttle.
when I apply slow forward momentum it isn't much of an issue. When I apply normal forward flight I have to compensate by adding throttle or it wont maintain altitude in forward motion. Then as I enter a turn and it slows down coming out of the turn if I don't drop the throttle precisely. It wants to gain altitude. So most of my flights end up looking like someone who is bobbing up and down in the air and doesn't have much control or confidence in where the quad will end up.
Some info about my quad sunnysky 2204 2300kv, bl heli 20a esc,5x3 props, naze 32 acro board running latest beta flight2.8.1, 200mw tx, runcam fpv
Ive took screenshots of some settings that you guys might want to know not sure what to look for or adjust.