Just add foam
Junior Member
Wondering if someone can shed some light on my problem?
Putting together the HK 250 quad and having a problem with the build. For the life of me I cannot get the receiver to bind correctly to the board. I have tripled checked all my connection and the kk2 1.5 continues give me errors. No Yaw or no throttle depending on which way the wind blows. I have tried multiple receivers. And get misc results, when the kk2 see's the receiver I get all connections except throttle on the kk2 but when I move the sticks I get zero feed back.
At one point I connected an esc to the receiver in error and the test screen where you check the servo inputs was refreshing, but I could actually move one of the sticks and got feed back.
I feel I must be missing something, or may be I need a BEC, but from what I understand the Afto ESC's included in the kit have 5 amp BEC's.
I've been flying electrics for a year now and have built many FT planes. I have been flying RC planes since the 90's so I'm not that new at the game. Never thought building a quad would be so difficult. I ended pulling my receivers from my Spit, mustang, and few of my other swappables trying to figure this out. Lucky the stryker did not have 6 channel or I would of pulled that as well....
Any suggestions would be great..
I have a spektrum 7 channel radio and been troubleshooting with orange and spektrum receivers. I have even isolated the receiver and one of the esc's and tested with a servo and everything seemed fine.
The radio setup was the default plane mode and I have not made any changes to the settings.
hahaha...the reviews said the KK2 board was a good starting point for a beginner quad build. One site quoted even a moron can set it up....now I wish I was a moron.
Putting together the HK 250 quad and having a problem with the build. For the life of me I cannot get the receiver to bind correctly to the board. I have tripled checked all my connection and the kk2 1.5 continues give me errors. No Yaw or no throttle depending on which way the wind blows. I have tried multiple receivers. And get misc results, when the kk2 see's the receiver I get all connections except throttle on the kk2 but when I move the sticks I get zero feed back.
At one point I connected an esc to the receiver in error and the test screen where you check the servo inputs was refreshing, but I could actually move one of the sticks and got feed back.
I feel I must be missing something, or may be I need a BEC, but from what I understand the Afto ESC's included in the kit have 5 amp BEC's.
I've been flying electrics for a year now and have built many FT planes. I have been flying RC planes since the 90's so I'm not that new at the game. Never thought building a quad would be so difficult. I ended pulling my receivers from my Spit, mustang, and few of my other swappables trying to figure this out. Lucky the stryker did not have 6 channel or I would of pulled that as well....
Any suggestions would be great..
I have a spektrum 7 channel radio and been troubleshooting with orange and spektrum receivers. I have even isolated the receiver and one of the esc's and tested with a servo and everything seemed fine.
The radio setup was the default plane mode and I have not made any changes to the settings.
hahaha...the reviews said the KK2 board was a good starting point for a beginner quad build. One site quoted even a moron can set it up....now I wish I was a moron.