Monster Parts

[Top Gav]

Hello I have some parts for sale
A Monster motor with a prop
A engine mount, speed controller, servos, control horns and enough depron to build a Monster P47, I have decided to quit this build because I can't enlarge the plans.

 

[Top Gav]

The Depron I have is 10mm and 5mm, whatever is your choice

 

[Mr Man]

Please explain what troubles you are having with the plans. We still might be able to help.

 

[Dutch Breeze]

Please explain what troubles you are having with the plans. We still might be able to help.

Hello I have some parts for sale
A Monster motor with a prop
A engine mount, speed controller, servos, control horns and enough depron to build a Monster P47, I have decided to quit this build because I can't enlarge the plans.

We can definitely help you. Right @Mr Man?

 

[Flyingshark]

Hello I have some parts for sale
A Monster motor with a prop
A engine mount, speed controller, servos, control horns and enough depron to build a Monster P47, I have decided to quit this build because I can't enlarge the plans.

If you're stuck on enlarging the plans, you can do that and still print them in A4/US Letter-size tiles on a standard printer with the free version of Adobe Acrobat. If you wanted to get fancy you could also do the enlargment in Inkscape, which would also allow you to adjust the thickness of the slots on the plans if you wanted!

I've seen several people enlarge FT planes to 200% scale, but I think the FT team recommended 185% for monster builds a while ago, because for that scale you can just double up the thickness of the foam and the standard A and B folds will still work. If you used a different scale, then all you would have to do is adjust the thickness of the slots for A and B folds to match your material. I'm not sure how A and B folds are done with depron, but maybe tape could substitute for the paper since depron is just bare foam!

Hope that helps, monster builds always look awesome in the air!

 

[Mr Man]

Any updates?