EDinCT
Member
So I'm thinking roughly 75" span. The wing will be built in 4 sections joined by ply spars sandwiched between foam spars, and the fuse will have to be in two sections as well since I'm at about 40" length. (I've built plenty of balsa and ply planes like this- just need to figure out the best way to do it with the foam... maybe an internal doubler at the joint. I intend on keeping the first version squarish FT style. The pics below are still very rough but give the basic idea of what I'm thinking. The finished wing will have dihedral not yet drawn in. Thoughts??
Last edited: