NAZE32 Problem

[mrafat]

Hello guys,

I have built a DJI F450 frame with a Naze32 and an E310 propulsion systen. I have been flying it great for the last few weeks with minimum tuning. I plugged it the other day to my computer and was changing the PID settings in Clean flight when my computer crashed and wouldnt turn on for a few minutes. After I powered my laptop up, my computer wouldn't recognize the naze32 anymore when connected with USB. I have tried different cables and shorting the boot pins with no luck.


Any suggestions would be appreciated

 

[makattack]

It's probably a device driver issue. If you are using windows, see if it comes up in device manager as a usb device when you plug it in. If it doesn't, you may need to install the vcp drivers from stm. There's a link from the cf configuration page. I believe you will need to create an account on the stm website to download.

 

[ElectriSean]

Many people have success using the ImpulseRC driver fixer - https://impulserc.com/pages/downloads