Help! Yet another problem binding the mobula 7

Mr_Stripes

Elite member
So in my last post i listed my problems. Thanks to Psyborg they are fixed. I flashed the firmware but somewhere b4 that I put the reciever into bind mode and my dx6 refuses to bind with it. I have gone various distances (1 inch to 10 ft.) from the reciever with no luck. I have tried it plugged into the computer and with a battery. Nothing I try works. Any help would be greatly appreciated.

Thanks,
Mr_Stripes
 

"Corpse"

Legendary member
Is the receiver flashing when you try to bind? If not it's not in bind mode.

Maybe try switching between 11ms and 22ms dsmx. That sometimes helps me.

I also heard that modems and internet broadcasting devices interfere with our binding. Try turning those things off.

I don't know what else to do. Maybe @PsyBorg and @ElectriSean know more about binding.
 

Mr_Stripes

Elite member
The reciever is flashing and I've tried switching the frame rate. I guess I could try to do it out in the garage. Thanks for the help!
 

PsyBorg

Wake up! Time to fly!
Maybe this will help. I have not used a spectrum radio ever. I am just aware of some of their issues from being here and reading or watching videos to help people. This may help you as its direct from Spectrum.

 

Mr_Stripes

Elite member
Ok, so I am probably returning it. If anyone comes up with a solution it would save me a lot of hassle. I am still going to want a whoop. I did order the mobula from banggood (but only because it was ridiculously cheap on sale, I don't trust them) and they'll probably give me credit to their store. Here are some good looking whoops that I found.

Ur85: basically an 85mm size mobula 25-200mw and 0805 instead of 0802
https://www.banggood.com/URUAV-UR85...mmds=search&ID=566600530011&cur_warehouse=USA

Ur85 hd: can record hd
https://www.banggood.com/URUAV-UR85...mmds=search&ID=566599530011&cur_warehouse=USA

Eachine trashcan: A mobula with a 16:9 Eos2 and 0803s 25-200mw
https://www.banggood.com/Eachine-TR....html?rmmds=search&ID=529571&cur_warehouse=CN

Or just get another mobula.

All the others have switchable vtx's so thats something and I kind of want hd...

Thx for the help!
 
Last edited: