• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Old plan conversion - Bill Evans Scimitar

jfaleo1

Junior Member
#1
Well I decided to work on my vector art skills and do some conversion work until I can get out and fly a bit to maiden the Quintet, SS2 and Zepher 1's Me-163.
My choices to get started were the .049 versions of Bill Evans Scimitar and the Kaos. I have started both (plus a DH Hornet), first is the Scimitar because it can be the basis for other Evans designed aircraft. It was quite large for a 1/2A size model, not sure what motor I will use yet but we'll see.
I am including the original plans (outer zone download) and my V0 beta plans for reference may start cutting foam today.....

Jeff
 

Attachments

jfaleo1

Junior Member
#2
Well here is the result of a couple hours work today, ok it got late;)
All it needs is a couple servos and a receiver and its ready to try out. I did not like how the wing came out but it may be ok, Added tip plates, need to change back end a bit. In short, I have definite plan mods to be made.
As you might be able to tell my little buddy is not happy with my late night build project:oops:
 

Attachments