BSquared18
Member
Hi, my wife and I like to carry some of our planes with us when we drive on long trips and stay at a destination for an extended period. Out minivan usually is pretty full. I'd like to be able to pack up the Flyer to bring along. One problem is the vertical fin. If there was a way to build the Flyer so that the fin could be removed, then the model could be packed in a much smaller space. (I'm at the stage right now where it's time to install the tail section on the Flyer I'm building.)
So, my question is, has anyone ever built a Flyer with a removable tail fin? If so, please point me to where the design is described or summarize it here. I did several searches and didn't come up with anything.
If no one has done it, I'll put my thinking cap on and see what I come up with. I'll be back to get feedback on any ideas I come up with.
Of course, any design would have to keep additional weight to a minimum. Also, of course, the rudder control rod will need to be easily detached from the rudder.
Bill
So, my question is, has anyone ever built a Flyer with a removable tail fin? If so, please point me to where the design is described or summarize it here. I did several searches and didn't come up with anything.
If no one has done it, I'll put my thinking cap on and see what I come up with. I'll be back to get feedback on any ideas I come up with.
Of course, any design would have to keep additional weight to a minimum. Also, of course, the rudder control rod will need to be easily detached from the rudder.
Bill