Road to aerobatic flying - Just getting started? Post here!(Also about Transmitters)

[ScratchBuildMast]

It should go well. Oh, one other thing, make sure you trim it so there is a little bit of up elevator when you let go of the control sticks. If you don't, it will nose dive into the ground when you try to launch. Josh Bixler said to do that in the build video.

Ok

 

[ScratchBuildMast]

I know some of you guys are good at designing, and some of you at planning. So could some of you guys help with my pentacopter design?

 

[ScratchBuildMast]

 

[ScratchBuildMast]

Imma make a Junkers JU87 Stuka Aerobatics, anyone wanna help?

 

[mach1 rc]

Imma make a Junkers JU87 Stuka Aerobatics, anyone wanna help?

Help in what way

 

[ScratchBuildMast]

as in designing stuuuf

 

[mach1 rc]

as in designing stuuuf

I could help. And @Grifflyer is really good with that kind of stuff

 

[ScratchBuildMast]

ok! thanks!

 

[ScratchBuildMast]

No maiden today. Snowing really bad here

 

[ScratchBuildMast]

What is some good water resistant spray?

 

[ScratchBuildMast]

Realized mini mustang body and vertical stab with the mini corsair wings is almost perfect for ju87 stuka

 

[mach1 rc]

Realized mini mustang body and vertical stab with the mini corsair wings is almost perfect for ju87 stuka

I think @Matagami Designs has made one. I'm not sure if there is plans for it though......

 

[ScratchBuildMast]

No plans

 

[The Hangar]

Great job, you might want to angle the motor up a bit so it's level with the wing. It'll fly weird with the motor pointing down like that.

I built mine with a bit of down thrust and it wasn’t an issue.

 

[ScratchBuildMast]

If this flipping snow stops, I could maiden today

 

[ScratchBuildMast]

Officially a well-known member now!!

 

[mach1 rc]

Officially a well-known member now!!

Congrats man👋

 

[The Hangar]

What is some good water resistant spray?

You can use “camp dry” or Minwax. @BATTLEAXE made a detailed video on how to do it.

 

[mach1 rc]

No plans

Wait just saw it 😀 it was @MiniacRC who made plans for it

 

[ScratchBuildMast]

Is the FT3d easier to fly than the edge 540?