Update
Howdy Y'all,
Well I know it has been a week and a half since I had a proper update. Quick note I was able to get it armed finally, but am having troubles with the motors. Particularly L/F and R/R motors just dying off after throttle input. If isn't one thing it is another, lol. So on to the part you actually came here to see. I was able to get all the items installed. The reason it has taken this long is because the USPS sucks when you try and count on them. My receiver was supposed to be here last Friday. For some reason they sent my package to St. Paul, MN before they sent it to me here in Chicago land. Oh and it came from Michigan FYI.
So enough about me venting. As I said I was able to get all the electronics installed and mostly everything buttoned down for the last time. The wiring went pretty smooth, and I decided to just use one step down regulator for the headlights. I put both the rc switch and the reg in front of the FC so that they would be hidden under the middle plate. I used the headlight wiring to make it easy with the connections for the actual lights. I am pretty pleased although there is still a little tidying up to do. I will do that after all is said and done though. I installed the receiver in the back and the GPS at first until I realized for balancing purposes it needed to be up front. So I repositioned the video tx to the side instead of the front. Other than that the Minimosd stayed were I initially placed it along with the RGB light ring. Which is on the bottom directly under the FC. Once all the electronics had been installed I was able to lock down the middle plate and the top plate. Then my headlights were installed onto the front of the quad. LOL I call it the WALL-E deadcat. I like it actually, at first I was on the fence but now I am diggin it. So with out any further ado here is some eye candy for ya, enjoy. (hopefully)
My work area looks like a Nuclear bomb went off. So before I get in the maiden I have to figure out the motor issues. I also got the video running, but of course there is a but, there is no overlay of the OSD on the video. Weird, it sends the video to the camera with no overlay? Well those two things I will be working on, when they are finished and everything is trust worthy I will have the Maiden for you and I promise it will be a lot better than my anyquad maiden lol. Well Lady's and Gents till next time...
P.s. if you happen to know of anything for the issues I'm having feel free to leave a comment.