SuperMicro Systems receiver problems connecting to motor?!?!

[FreakonFlite]

So I picked up this receiver and motor the other day cause the spektrum one is wayy overpriced and it works fine, but I just don't know how to hook up the motor to it? Does anyone have any ideas on how this thing works, I couldn't find any manuals on it online either?

Receiver I bought: https://hobbyking.com/en_us/2-4ghz-...brushed-esc-linear-servos.html?___store=en_us

Motor I bought: https://hobbyking.com/en_us/hobbykingtm-eps-7-geared-brushed-motor-system.html

 

[rockyboy]

I haven't used that particular one, but do have experience with the Spektrum ones and a WL Toys knock off, so maybe it will help us figure this out. Since the website doesn't have much in the way of pictures, can you post a close up picture of the top and bottom of the receiver board? I'm pretty sure you'll need to solder the two leads from the motor to one of the open hole/pad sets on the receiver, but can't tell which one from the website picture.

Also, Welcome to the Forums!

So what do you like to fly and build?