throttle from the center

[a.shvayakou]

Hi,
Could you help me with the problem why my throttle stick works starting from the center position.
Thanks

 

[Shurik-1960]

Hi..With the throttle handle trimmer, make sure that there is an extreme down position. Further..
Calibrate the throttle stick : 1. Turn on the transmitter with the throttle knob turned off to the maximum , 2.Connect the receiver with the motor to the battery supply 3. The engine will beep 3 times- remove the throttle stick at the minimum. All.Calibration is complete.

 

[Merv]

... my throttle stick works starting from the center position...

If calibrating does not fix the problem, make sure the Tx is in airplane mode.
Throttle starting in middle could be a sign the Tx is in helli mode.

 

[TEAJR66]

If your throttle is 0 at center and turns the motor one way when moved down and opposite direction when moved up, your ESC is in bi-directional mode. Find the documentation for your ESC and follow the instructions for changing modes.

 

[a.shvayakou]

Hi..With the throttle handle trimmer, make sure that there is an extreme down position. Further..
Calibrate the throttle stick : 1. Turn on the transmitter with the throttle knob turned off to the maximum , 2.Connect the receiver with the motor to the battery supply 3. The engine will beep 3 times- remove the throttle stick at the minimum. All.Calibration is complete.

Thanks, it worked