Upgrading Help

Armetron

Junior Member
Hey guys long time no see. So I have been flying my ElectroHub X quadcopter around for quite some time and I finaly think its time for me to give it an upgrade.

rsz_20160103_204719.jpg

My build consists of
x1 Quadcopter Electrohub in X configuration
x4 EMAX 2213-935KV motors
x4 Carbon Fiber 8" Props
x4 Afro 30A ESC
x1 5000mah 4S battery
x1 Pixhawk flight controler


My question for this forum is I want to buy the FPV Rail System - Long but since I changed from the recommended 10" props and 3S battery to 8" props and 4S battery I'm not sure if I should change back. Does having the 10" props with lower voltage increase my flight time than staying with the 8" props with higher voltage if I added the Rail System?

all help and opinions are welcomed, and feel free to give more ideas as to what I should change/add.

PS: I would like to stick to an X configuration. I know that the "Deadcat" configuration would give me more clearance room for the camera but to me it just looks weird, hoping that the rail can stick enough forward and down to clear the rotors

ALSO Im not sold on a particular gimbal yet, I have a Sony action cam but I may get a GoPro Hero4 Silver
 
Last edited: