- Type
- 3D Print Files (STL, G-code, etc.)
Gremlin Guardian Caddx Ant AIO FPV Camera Mount
Design By: David Jester
Design By: David Jester
3D printable fixed camera to mount the Caddx Ant AIO FPV Camera on the Flite Test Gremlin Guardian.
Suggested Print Settings:
Filament: | PLA, PLA+ (Tough PLA) |
Layer Height: | 0.2mm |
Supports: | None |
Rafts: | None |
Infill: | 25% |
Perimeters: | 3 |
Top Layers: | 4 |
Bottom Layers: | 4 |
*Always adjust your print settings to meet your printer and filament requirements.