- Type
- 3D Print Files (STL, G-code, etc.)
After losing my third nose, I'd had enough.
This works like a charm!
I glued mine in place using wood/gorilla glue BEFORE the wings were mated to the fuselage.
Should print solid with 2 walls selected in your slicer (ADD Supports!)
Let us know how it worked for you!
Check out the video, I had a 2200 crammed in the nose and it STILL didn't come off!!
![6c8f7360a33b00f30dab0946a513eedf_preview_featured.JPG 6c8f7360a33b00f30dab0946a513eedf_preview_featured.JPG](https://ftforumx2.s3.amazonaws.com/2018/11/203467_7a1f6037a5c27f9b7b7525725621bb78_thumb.jpg)
This works like a charm!
![70caeab94b71f95256b5f347acee34d3_preview_featured.jpg 70caeab94b71f95256b5f347acee34d3_preview_featured.jpg](https://ftforumx2.s3.amazonaws.com/2018/11/203469_57d94df87cdf228d6e61c0beda73bf5c_thumb.jpg)
I glued mine in place using wood/gorilla glue BEFORE the wings were mated to the fuselage.
![f2993b8eae41a55575c1305d87eaef30_preview_featured.JPG f2993b8eae41a55575c1305d87eaef30_preview_featured.JPG](https://ftforumx2.s3.amazonaws.com/2018/11/203471_0a42d5fda6002e3a1f167625b2b3a3e8_thumb.jpg)
Should print solid with 2 walls selected in your slicer (ADD Supports!)
![30a594842fa312dfb70c25b5259c2592_preview_featured.JPG 30a594842fa312dfb70c25b5259c2592_preview_featured.JPG](https://ftforumx2.s3.amazonaws.com/2018/11/203473_920757fd7b4ead8f191cfba11f694e84_thumb.jpg)
Let us know how it worked for you!
Check out the video, I had a 2200 crammed in the nose and it STILL didn't come off!!