- Type
- 3D Print Files (STL, G-code, etc.)
The Mustang is by far and wide my favorite airplane.
I wanted to add some details to one of my Flite Test builds for Flite Fest Ohio (2018) and came up with these.
Slow down your prints a bit as the pipes can be tricky to print.
I have a .3 nozzle and set it for .1 layer height. Infill and supports aren't necessary.
Here's a picture of the finished article.
I wanted to add some details to one of my Flite Test builds for Flite Fest Ohio (2018) and came up with these.
Slow down your prints a bit as the pipes can be tricky to print.
I have a .3 nozzle and set it for .1 layer height. Infill and supports aren't necessary.
Here's a picture of the finished article.
