flite test

What jet would you like to see FT do? I am just curious as to what we would as a majority want. maybe FT will consider this

FT Tubby B-17 Nose Description: This FT Tubby B-17 Short Kit includes printable files for the plywood components that are unique to this aircraft. Recommended Settings: Material: PLA/PLA+ Infill: Firewall & Wing Mount Plate: 100% All other parts: 30% Store Link: No printer, no problem...

FT Landing Gear Heavy Description: The printable FT Landing Gear Heavy files are great for our scratch building friends but also for those who have had a few too many rough landings and need to print replacements. The files include the 3D printed landing gear inserts and receivers that screw...

FT Tubby Bubby Bomb Description: This printable Tubby Bubby Bomb is a cartoony ordnance package for your FT Tubby B-17. Includes a flap to add baby powder for smoke effect on impact with the ground. Recommended: Material: colorFabb VARIOSHORE TPU Related Products: FT Tubby B-17 FT Tubby B-17...

FT Tubby B-17 Nose Description: The FT Tubby B-17 Nose is perfect for those who are scratch building or those who need a replacement after a little whoopsie with the ground. This printable nose easily fits onto the front of your Tubby B-17. It also gives your aircraft lines that would be very...

I think you guys @flitetest @fliteadmin @FTCA Director @Wes B. @Rasterize . That you guys should do a design challenge like you did for the Red Bull air racer challenge. Make the prize something like $??? In flite test merchandise.

Hello I am building the Ft Viggen, and am trying to decide on paint schemes. I am thinking of doing a tiger stripe design, but I am open to other ideas. Thank you!

Another weekend, another build. This time we wanted an A-10, but not a prop-driven version. There are a few other EDF mounting solutions that I found, but I didn't like the scale and some were overly complex. I designed my own mount on Fusion 360, printed it on my Bambu P1S out of PETG, and...

There's an organization called Samaritans Purse, and every year they have an event called "Operation Christmas Child". They send out these small boxes that you can fill with toys, or toiletries, and then they get sent to third world countries for kids in poverty. So I thought of making a small...

baby blender and dreamer biplane

Description: Foam board flying Christmas trees available in two different sizes. Josh Bixler designed the small version for use with the FT 1806 (A Pack) motor and a 650-800 mAh 3S LiPo battery. David Jester designed the large version for use with the FT 2212 (B Pack) motor and a 1300 mAh 3S...

Hi members, I am new to the hobby. I would like to understand the differnce in the FT Power Packs offered on the FT Store. More specifically between Power Pack C & B However, if someone has the information for all power packs & what are the differnces between them, could they please share...

PSA: The Freedom Fox v.2 is FINALLY HERE! -> https://bit.ly/3z9Tuyr Bigger Motor, Bigger Esc and better prop give this airplane the next level power you have been looking for! That's not all... if you purchase with the code "FreedomFoxShip" you are going to get free shipping on your...

FT Grumman G-44 Widgeon Water Rudder Design By: David Jester 3D Printable replacement water rudder for the Flite Test Grumman G-44 Widgeon. Print vertical with PLA or Tough PLA (PLA+), 100% infill, no supports, with brim.

Micro Adventure and Micro Beaver Motor Mount Design By: David Jester 3D Printable replacement motor mount for the Flite Test Micro Adventure and Flite Test Micro Beaver. Print with PLA or Tough PLA (PLA+).

FT Flerken Printed Parts 3D Modeled By: Dan Sponholz If you're building the FT Flerken from the purchased plans available from the FTCA, you can print these STL files to help you complete your build. Or save even more time and order the speed build kit here: FT Nano Flerken FT Flerken...

Recently, I have been a fan of the video game, Destiny 2 even though I have never played Destiny 1 before. Of course, I am an advocate of aeronautics and RC Airplanes as well. When doing some research about what Destiny 1 was like a few weeks ago, I stumbled upon the seasonal event, "Sparrow...

F-18 Super Hornet Ordnance Design By: John Overstreet Want to load out your Flite Test Master Series F-18 Super Hornet? Look no further. Master Series designer John Overstreet has created a collection of accessories for you to download and print on your 3D printer to make your F-18 look...

FT Simple Scout XL Designed By: Josh Bixler and Dan Sponholz Plans By: Dan Sponholz Firewall STL : https://forum.flitetest.com/index.php?resources/ft-scout-xl-firewall.290/ Gear Plate STL: https://forum.flitetest.com/index.php?resources/ft-scout-xl-gear-plate.291/

FT Flerken Printed Parts 3D Modeled By: Dan Sponholz If you're building the FT Flerken from the purchased plans available from the FTCA, you can print these STL files to help you complete your build. Don't have a printer? No Problem. You can order the plywood parts from the Flite Test Store...