I have this (admittedly fragile but) nicely flying 230 quadcopter. I'm using the KK flight controller. I can do nice banked turns and stuff, but I need to keep the throttle at 60-70%, rather than the 50% I would expect. I also have to "emergency compensate" with the throttle more than on my 450...
Hello I’m hoping someone can help me with my issue.
I finally got all the parts for my quad-copter and from what I can tell I have everything set correctly and everything is bound correctly. However the KK2.0 board will not arm and the receiver test shows 0 for all values despite the TX and RX...
Thanks for taking the time to read this. I want to confirm my thinking. The throttle limits on the KK2.0. If I set the limit to say, 70%, the KK2 or ESCs will limit the motors output to 70% of its maxim power, is that right?
I just wanted to let everyone know the Kickstarter for the Game of Drones combat tough quadcopter airframe is in it's final 24 hours. They are already funded and actually very close to their 50K target. Check out the videos, pretty impressive. I have been flying quadcopters for a while now...
Hey all,
I'm having an issue with my newly assembled batbone tri. I'm using a KK2.0 board.
When doing some throttle ups with the entire system powered up, I'm having an odd issue.
Whichever motor is plugged into the M1 slot (This is normally the front left motor) will continue to rev up to a...
Hello All,
I'm new to the hobby and am embarking on my very first scratch build using the bat bone kit.
Seeing how hobbyking has been sold out of the KK2.0 LCD flight computer for quite a while, I'm getting impatient and looking for viable alternatives. I would LOVE to do the DJI Naza Lite...
After what seems like a frustratingly long time of waiting for parts, breaking stuff and other setbacks, it feels like I'm finally starting to make progress!
I got some time again this weekend to fly and I'm already starting to feel more comfortable. Its essentially my third time on the...
Q450 - 450mm Frame
KK2 V1.5 - Flight Controller
ESC - Turnigy Plush 30a
Motor - NTM Prop Drive Series 28-26A 1200kv / 250w (Too small for the props, needs 750-900kv motor...)
Battery - Turnigy nano-tech 3300mah 3S 25~50C Lipo Pack
Using a CD container to cover the delicate board mounted on the...
Hi everyone, I am new to the forums but I have been watching flitetest for a long time, and have now finally finished my first quad.
I flew it several times over this past weekend and found some odd behaviours.
1. When I go into fast forward flight and then try to slow down, the quad pitches...