• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

programming

  1. L Edge

    Automating Aft to Forward Swing Wing in Flight

    After building and flying the Tomcat so the throttle controls the movement of the wing from center to aft, it was there I got the idea to see if I could design a plane that no one has built and flies. The wing would be able to start perpendicular, then either go aft(Tomcat) or go forward(X-29)...
  2. Tench745

    Programming scale engine starts.

    I was watching a video of engine starts recently and I thought it would be cool to have a scale looking engine start for my Dumod. I have a Taranis X9D+ and would like to figure out how to program it so that the left motor turns very slowly for a bit, then kicks faster a couple times like each...
  3. E

    Anyone Know How to Program "Android"? IE The tablet that makes up my TX???

    Ok so I have a Yuneec Typhoon H that comes with an ST-16 Transmitter (which all the transmitter consists of is a 7" Android Based tablet directly in the center of the 14" wide transmitter & everything transmitter wise runs directly through it so I.E. its all digital & although one would come to...
  4. D

    Programming Naze32

    Hi, I was looking into buying a versacopter v2 and using the naze32 setup. Before I invest in all of this, I was curious on programming the flight controller. Since I have a cheap transmitter, it doesn't have a screen or any of those types of functions. Just the basic controls with a few toggle...
  5. W

    Need Help with a Naze32 Rev6 Board

    Just got a quick question: I am trying to flash my Naze32 Rev6 board, but I keep getting the error, "Failed to open serial port." I know utterly nothing about these things, and would really appreciate some help! If needed, I can send screenshots and provide more details. Thanks!
  6. Nerd Ninja

    HELP NEEDED!! Calling all PROGRAMMERS, ENGINEERS, and any HOBBYIST Who Scratch Builds

    Hello Flite Test Forum! And mods. Really sorry if this is the wrong spot! Looked like the best area in my opinion. Um, I'm new here so first off hello! My name is Trevor and I've been binge watching FliteTest videos for a few weeks now since I found the channel. I've always been a fan of...
  7. R

    Transmitter problems (Turnigy 9x)

    Hello, I just bought a new Turnigy 9x radio and I'm having some problems with it. This is my first computerized radio so I am very new to this. I have a bixler 1.0 and I am trying to set it up on acro mode but for some reason my motor is not spinning. It shows on the display option in the...
  8. T

    build. kk2 tricopter i need So, help

    So, I'm building an rcexplorer tricopter, and for a control board, I have purchased a kk2, no point one or mini, thanks to readytoflyquads. I soldered all my little pins and plugged it all in and... im up a river i thought oh it will have an older firmware ill get the usb adaptor and update it...
  9. T

    kk2 firmware and that usb dongle

    So, I'm building an rcexplorer tricopter, and for a control board, I have purchased a kk2, no point one or mini, thanks to readytoflyquads. I soldered all my little pins and plugged it all in and... im up a river i thought oh it will have an older firmware ill get the usb adaptor and update it...
  10. M

    Mystery M-30 esc no tones for programming

    Hey everyone, got a quick question for yall. I have 4 Mystery M-30 esc's installed on my new v-tail. I want to program them so I do this: Plug 1 esc into throttle port on my receiver. Full throttle on transmitter and power it on. Plug in battery. then...........nothing, no tones only heat in...
  11. F

    RC blimp for Aerial Video

    Hey all, I have been asked by my church if I could do dome aerial video work for them at an up coming event. They first asked if my airplane would be able to fly in a 800 person arena. I said it could, but it would end up hitting a wall and fall onto people. I did mention to them that I have a...