• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

“Fly as hard as you can” challenge!

SquirrelTail

Well-known member
That was some seriously cool flying @mach1 rc ! I just looked up the Sukhoi, and it is on my list of rtf planes to buy now! Pretty high up since I want a good 3D plane that looks cool and this seems to be a really good option. I actually had never heard of it before you mentioned it. Tha other planes that I would consider are the eflite extra 300 and some of the flex innovation planes. Also, @SquirrelTail have you ever flown the Hangar 9 Sukhoi?
I have not. I would like to tho
 

chris398mx

Well-known member
Looks pretty cool too, but a bit pricey for my liking. When they make an easily replaceable DTFB one I'll be down...besides, I got my four wing to tweak:p(not that's it's a full 3d bird, but pretty dang aerobatic).
@Vimana89 I designed a Mamba biplane that I use a radial C pack motor on 3S with a 10x38 prop. Below is the thread I started for it if you want to give it a build. I just updated the plans on the first post with a few corrections.

https://forum.flitetest.com/index.php?threads/mini-mamba-3d-biplane.60938/
 

Vimana89

Well-known member
@Vimana89 I designed a Mamba biplane that I use a radial C pack motor on 3S with a 10x38 prop. Below is the thread I started for it if you want to give it a build. I just updated the plans on the first post with a few corrections.

https://forum.flitetest.com/index.php?threads/mini-mamba-3d-biplane.60938/
Awesome! It's on my ever-growing build/potential build list. I remember viewing the thread before now and thinking it was a nice build, just forgot the name until now. If I get into 3d any time soon, I'm going to want a bipe and a 3d delta, so I may start with your design to get my bearings.
 

BATTLEAXE

Well-known member