Few things done this weekend.
Left side wiring all done, see video above. One thing i gotta say about these $40 servos they are FAST. And this is only on 6v. On 8.4 they must be nuts.
Heres how the fuselage looks with wing mount holes:
And the threaded holes in the left wing.
Right side electronics is about 15 minutes from being done.
After that i just need to remeasure dimensions to recheck CG. Based off all my previous DIY builds i am going to guess that while there are differences from my original plans the change to estimated cg will be minimal, but always, if for nothing than else than peace of mind, i like to recheck everything.
And than i can put the plane all together and see how much weight i need in the nose. Based off needed weight i will either use 2x 26800's or 2x 18650's in 2s configuration. That would be 230g vs 100g.