Another snag! The tail feathers are supposed to screw onto the fuselage with two very long hex head screws. This is nice, except those screws aren't in the hardware bag and neither of the screw supply stores in my area have them long enough. It's supposed to be an M3x45mm hex head...they only have M3x35, aghhh! I ended up ordering a pack of 10 for like $4 after shipping. I pulled this off another site, here's what it should look like.
And this is what the tail gear should look like.
There's supposed to be a pre-drilled hole in the rudder the gear slides into..not there on mine either.
Here's what I got. I found some very long threaded push rods so I can line everything up to attach the tail wheel.
No pre drilled hole to be found.
I had to measure and put the bend in my tail gear.