SOLD
$30 shipped to the lower 48. I don't have much of a history here, but I'm also Magnus357 on Ebay, you can check me out there.
I have an assembled original Batbone tricopter frame from Flite Test.
It's the tricopter shown here:
http://flitetest.com/articles/bat-bone
This frame was flown very little and never wrecked. All you need is motors, ESCs and a servo for the tail.
Included is a 1-to-3 power harness with 3.5mm bullet connectors and a XT60 connector. A servo extension lead for the tail servo. A full crash kit with extra arms, an full replacement feet, both normal and tilt.
I've also included the AnyCopter base kit that would allow you to convert this kit to a quad by using the spare basic feet.
Lastly, I'm including a free KK board.
http://www.hobbyking.com/hobbyking/s...ga328_PA_.html
This is a basic control board, but can do the business.
$30 shipped to the lower 48. I don't have much of a history here, but I'm also Magnus357 on Ebay, you can check me out there.
I have an assembled original Batbone tricopter frame from Flite Test.
It's the tricopter shown here:
http://flitetest.com/articles/bat-bone
This frame was flown very little and never wrecked. All you need is motors, ESCs and a servo for the tail.
Included is a 1-to-3 power harness with 3.5mm bullet connectors and a XT60 connector. A servo extension lead for the tail servo. A full crash kit with extra arms, an full replacement feet, both normal and tilt.
I've also included the AnyCopter base kit that would allow you to convert this kit to a quad by using the spare basic feet.
Lastly, I'm including a free KK board.
http://www.hobbyking.com/hobbyking/s...ga328_PA_.html
This is a basic control board, but can do the business.
Attachments
Last edited:
