jpot1
Elite member
Saw an article on the FT site where mudman59 showed his ‘Cuda Wannabee. Looked like a cool plane and relatively easy to build. Wanted to try a more symmetrical wing which I had never done before. Weather is preventing flying so plenty of time to build.
Specs:
30” wingspan
2 x 9g servos for elevons
40A esc w/ Turnigy d2826/6 2200kv motor w/ 6x4 prop
2200 3s
Built by TLAR. Working on plans in Inkscape as I go.
Also did a "mini" version.
Specs:
22" wingspan
2 x 5g servos
2204/2205 motor, 6x3 or 4 prop
3S 800mah
View attachment mini cuda.pdf
Specs:
30” wingspan
2 x 9g servos for elevons
40A esc w/ Turnigy d2826/6 2200kv motor w/ 6x4 prop
2200 3s
Built by TLAR. Working on plans in Inkscape as I go.
Also did a "mini" version.
Specs:
22" wingspan
2 x 5g servos
2204/2205 motor, 6x3 or 4 prop
3S 800mah
View attachment mini cuda.pdf
Last edited: