Total N00b question here. Just getting started in all this. Bought the all you need to fly kit. Came with Graupner MZ-10 transmitter and a GR-12L receiver. Instructions are pretty vague, but say to:
"Power on both transmitter and receiver. Press and hold receiver SET button for more than 3 seconds. Press MODE button and they will link up. You will know by a green light on receiver and an orange light on transmitter."
I turn on transmitter and the BIND light comes on. I never see a green light on the receiver. I'm doubting there even is a green light. Just a red one. The main red light up GRAUPNER symbol on the transmitter constantly flashes. Anyhow the ESC and motor do respond to stick movement. The ailerons respond also. I'm just worried that the lights aren't right. Later I found what could be a bind plug, but it says its a "Shunt Connector". So any help would be appreciated. I remember seeing a video that kind of covered it, but it wasn't a video specifically for this. It just happened to mention it in some plane build. Thanks...
Starfyter
"Power on both transmitter and receiver. Press and hold receiver SET button for more than 3 seconds. Press MODE button and they will link up. You will know by a green light on receiver and an orange light on transmitter."
I turn on transmitter and the BIND light comes on. I never see a green light on the receiver. I'm doubting there even is a green light. Just a red one. The main red light up GRAUPNER symbol on the transmitter constantly flashes. Anyhow the ESC and motor do respond to stick movement. The ailerons respond also. I'm just worried that the lights aren't right. Later I found what could be a bind plug, but it says its a "Shunt Connector". So any help would be appreciated. I remember seeing a video that kind of covered it, but it wasn't a video specifically for this. It just happened to mention it in some plane build. Thanks...
Starfyter