Hai-Lee
Old and Bold RC PILOT
I design a number of different designs from different thicknesses of Foam Board, (3mm and 5mm), which may use some plywood, balsa and/or Carbon fibre. These designs are sometimes quite unique but still rather conventional aircraft.
Being in Australia I do not have easy access to the same grade of FB that is used widely in the USA and so I would ask if anyone is wishing or able to collaborate in building and then documenting the aircraft to enable posting as a viable build for the majority of FT forum viewers.
In addition I often use different techniques or construction methods that are different to those in current usage in the FT forums.
I do not have the ability to provide the high quality pictures and videos that are in widespread use.
Some of the upcoming builds include an order for what is known here as a Slick Trick, a KFM 800mm Wing, and a second generation version of the FT Spitfire.
The plane designs will not be a continuous stream as I also do repairs of foamies for others, (and myself sometimes), and I need to produce moderate numbers of the same designs for retail sale.
Just let me know if you are willing to assist. Heck you can even post the design as your own because in a different FB it effectively will be!
Have fun!
Being in Australia I do not have easy access to the same grade of FB that is used widely in the USA and so I would ask if anyone is wishing or able to collaborate in building and then documenting the aircraft to enable posting as a viable build for the majority of FT forum viewers.
In addition I often use different techniques or construction methods that are different to those in current usage in the FT forums.
I do not have the ability to provide the high quality pictures and videos that are in widespread use.
Some of the upcoming builds include an order for what is known here as a Slick Trick, a KFM 800mm Wing, and a second generation version of the FT Spitfire.
The plane designs will not be a continuous stream as I also do repairs of foamies for others, (and myself sometimes), and I need to produce moderate numbers of the same designs for retail sale.
Just let me know if you are willing to assist. Heck you can even post the design as your own because in a different FB it effectively will be!
Have fun!